MegaLite Axis Manual de usuario Pagina 6

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 17
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 5
Max. 100 cm
Max. 80 cm
Max. 130 cm
Max. 25 cm
Max. 20 cm
Max. 20 cm
NEW
Min. 11,1 cm
2 cm
2 cm
2 cm
2 cm
0,8 cm
2 cm
0,8 cm
18 cm
2 cm
Installation in rows and block strip
Flush installation of the barefoot board (illustration on the le , in rows) and off set installation
(illustration on the right, block strip) up to a terrace surface of 12 x 12 m. At the ends of the
boards, a distance of 2 cm must be set between the construction planks! Bolt the construc-
tion planks to the concrete plate and install retaining bands. The ends of the boards must
have a minimum distance of 8 mm.
IMPORTANTFor installation in rows, the construction planks must be installed double at
a distance of 18 cm (between the axes).
Installation of surfaces larger than 12 × 12 m
Bolt construction joint pro le to the concrete plate in longitudinal and lateral direction of
the barefoot boards.
IMPORTANTKeep a distance of at least 2 cm on both sides between barefoot boards,
construction planks and construction joint profile!
INSTALLATION TYPES WITH SUBSTRUCTURE
FIX STEP SYSTEM
All the above installation types can also be realized with the new substructure system
megawood
®
FIX STEP. For this, follow the instructions on pages 12 to 18.
Installation onto an old terrace surface
Fastening of the substructure with old surface: Mount the construction plank onto levelling /
bed plates or rubber pads (total structure at least 20 mm) and bolt it. Do not directly install on
the old surface so as to ensure water drainage.
IMPORTANTSet-up is only possible if the old surface is sufficiently drained with 2 %
sloping. Prevent dammed-up water. Ensure sufficient ventilation from below.
Installation on roof terraces
Install concrete plate on the existing building protection mat: Bolt construction planks to
bed plates or rubber pads (at least 3 mm) onto concrete plate 400 × 400 × 50 mm. Ensure
that drainage is suffi ciently dimensioned so as to ensure complete water drainage.
IMPORTANTCoordinate the type of the structure with an architect or a specialized
company. Ensure sufficient ventilation from below. We recommended lining the roof terrace
with a gravel bed (grain size 32 to 64 mm), which will ensure the required ventilation.
CONSTRUCTION
PLANK
Min. 8,1 cm
NEW
11
INSTALLATION
TYPES
10
Hint:
The megawood
®
range of boars is supplied in the lengths of 300 / 360 / 420 / 480 / 540 / 
600 cm (exception WAVE board, cf. page 31). Terrace objects that are planned with larger
lengths may be realized with installation in rows or in block strip.
Bench The megawood
®
bench with continuous
CONSTRUCTION PLANKS can be set up with a distance of
up to 130 cm between axes and a projecting length of up to
25 cm. The seat and the rear support form an elegant unit
that promises highest seating comfort. The bench is available
as complete set in all fi ve colour variants.
Stairsmegawood
®
CONSTRUCTION PLANKS are the
ideal cover for your terrace stairs. Due to the extremely high
bearing capacity of the megawood
®
CONSTRUCTION PLANK,
you can implement stair constructions with a distance of up to
80 cm between axes and a projecting length of up to 20 cm.
Small bridge Even in a highly used area such as
bridge construction, the megawood
®
CONSTRUCTION
PLANK with a distance of up to 100 cm between axes and a
projecting length of up to 20 cm can be used as bridge deck.
Occasional contact with water is no problem for the
megawood
®
CONSTRUCTION PLANK.
Flexible in use 
The CONSTRUCTION PLANK by megawood
®
has many talents. It can be used as sub-struc-
ture but it also suitable for stairs and benches. The megawood
®
CONSTRUCTION PLANK
is even suitable as planking for smaller bridges. The extremely high bearing capacity of the
megawood
®
CONSTRUCTION PLANK makes it a fl exible feature and opens up new applica-
tion areas where other products fi nd their limits. The megawood
®
CONSTRUCTION PLANK
is available in nature brown, nut brown, lava brown, basalt grey and slate grey.
CONSTRUCTION PLANK
40 × 112 mm | L: 360 cm
CONSTRUCTION PLANK
PREMIUM PLUS
40 × 112 mm | L: 360 cm
Vista de pagina 5
1 2 3 4 5 6 7 8 9 10 11 ... 16 17

Comentarios a estos manuales

Sin comentarios